Shield “Standard”
Complete set
- Shield as a set with filler material.
- Frame with the profile width of 40 mm.
Type of finishes to shields
Types of shield perforation
The shield “Standard” distinguishes itself among other shield types by its narrow profile of framing (40 mm). It is a perfect ready-made solution. The shield offers freedom of assembling.
If the typical size of the shields does not suit your niche, you may order them to an individual measure.
The shield design does not interfere with normal air interchange. The shield keeps a high heat exchange.
Decorative shields interrupt the direct convection of the radiator without reducing its heat power.
When mounting, the shield must be beyond the niche’s borders at least by the profile width. Apart from this, for safety’s sake and for keeping the proper heat exchange, the decorative shield must be installed at a distance no less than 35 – 40 mm from the radiator and 60 – 70 mm from the floor and window-sill (if placed under the window-sill). Keeping the shield at a distance from the floor prevents moisture from getting on the lower part of the shield during wet cleaning.
The shield is designed for mounting together with a radiator placed in a niche.